Our Products

Customer Care

Need Assist? Get in touch with our customer care hotline
Tel : +603-7785 3263

Find out more

Vacuum Blood Collection System




Haematology / EDTA Tube

The Haematology Tubes are mainly used for Blood Routine Examinations. The optimal EDTA concentration shall be 1.8mg/ml blood. We apply the quantitative ultra-fine atomized spraying and instant drying technology, in order that the additives finely and accurately coated to the interior wall. This ensures fast mixing of blood with the additive and thus enhances the anticoagulation effects.

Cap Color: Purple
Specimen: whole blood
Anticoagulant: EDTA K2 or EDTA K3
Description: Spray dried
Material: Glass or PET
Tube Size: 13x75mm, 13x100mm
Max. Vacuum deviation: ± 10%
Storage condition: 4-25°C in well-ventilated environment with relative humidity less than 80%.

Plasma Tube

The Plasma Tube contains Heparin Lithium or Heparin Sodium as anticoagulant. Normally, 16IU heparin can anti-coagulate 1 ml blood specimen. The Heparin tubes are mainly used for biochemical tests in emergency treatment and blood flow transformation tests.

Cap Color: Green
Specimen: plasma
Anticoagulant: Heparin Sodium or Heparin Lithium
Description: Spray dried
Material: Glass or PET
Tube Size: 13x75mm, 13x100mm
Normal draw volume: 2m1, 3m1, 4m1, 5m1, 6m1
Max. Vacuum deviation: ± 10%
Storage condition: 4-25°C in well-ventilated environment with relative humidity less than 80%.

Coagulation Tube

The Coagulation Tube is used for coagulation testing. They contain buffered Sodium Citrate with the concentration of 3.2%. The cubage ration of blood to the Sodium Citrate is 9NC.

Cap Color: Blue
Specimen: whole blood or plasma
Anticoagulant: Sodium Citrate 3.2%, 9NC
Description: Liquid
Material: Glass or PET
Tube Size: 13x75mm, 13x100mm
Normal draw volume: 1.8m1, 2.7m1, 3.6m1, 4.5m1
Max. Vacuum deviation: ± 10%
Storage condition: 4-25°C in well-ventilated environment with relative humidity less than 80%.

Coagulation Tube

The ESR Tube is used for blood sedimentation tests. It contains Sodium Citrate with the concentration of 3.8%. The cubage ratio of blood specimen to the Sodium Citrate is 4NC.

Cap Color: Black
Specimen: whole blood
Anticoagulant: Sodium Citrate 3.8%, 4NC
Description: Liquid
Material: Glass or PET
Tube Size: 13x75mm, 13x100mm, 8x120mm
Normal draw volume: 1.6m1, 2.4m1, 1.28m1
Max. Vacuum deviation: ± 10%
Storage condition: 4-25°C in well-ventilated environment with relative humidity less than 80%.

Fluoride & Oxalate Tube

The gray cap tubes are applied for testing blood glucose and lactate. Normally,Sodium Fluoride is used in the VacuCyteTM Glucose Tubes, combined with an anticoagulant such as Potassium Oxalate or EDTA.

Cap Color: Gray
Specimen: plasma
Anticoagulant: Sodium Fluoride & Potassium Oxalate; Sodium Fluoride & EDTA
Description: Spray dried
Material: Glass or PET
Tube Size: 13x75mm, 13x100mm
Normal draw volume: 2m1, 3m1, 4m1, 5m1, 6m1
Max. Vacuum deviation: ± 10%
Storage condition: 4-25°C in well-ventilated environment with relative humidity less than 80%.

Serum Tube

The Serum Tube is used for serum biochemical tests. The interior wall is finely coated with Clot Activator which accelerates the blood coagulation process after collection. The advanced coagulant formula results in moderate blood coagulation in a relatively short time, avoiding potential hemolysis problem that caused by too rapid clotting. This generates clear and transparent serum specimen after centrifugation.

Cap Color: Red
Specimen: Serum
Additive: Clot Activator
Description: Spray dried
Material: Glass or PET
Tube Size: 13x75mm, 13x100mm, 16x100mm
Normal draw volume: 3m1, 4m1, 5m1, 7m1, 9m1
Max. Vacuum deviation: ± 10%
Clotting time: <30 min. in normal temperature
Max. Centrifugation speed: 5000 rpm
Storage condition: 4-25°C in well-ventilated environment with relative humidity less than 80%.

Serum UIT Gel Tube

The yellow cap tubes contain Separating Gel & Clot Activator. The interior wall is finely coated with Clot Activator which accelerates the blood coagulation process after collection. The advanced coagulant formula results in moderate blood coagulation in a relatively short time, avoiding potential hemolysis problem that caused by too rapid clotting. After the centrifugation process, the blood serum appears clear and transparent,and well meets the quality requirement of clinical tests.

Cap Color: Yellow
Specimen: Serum
Additive: Separating Gel & Clot Activator
Description: Spray dried
Material: Glass or PET
Tube Size: 13x75mm, 13x100mm
Normal draw volume: 3m1, 4m1, 5m1, 6m1
Max. Vacuum deviation: ± 10%
Clotting time: < 30 min. in normal temperature
Max. Centrifugation speed: 5000 rpm
Storage condition: 4-25°C in well-ventilated environment with relative humidity less than 80%.

U-MBCT™: Micro Blood Collection Tube

The U-MBCT tube is mainly used for Peripheral Blood Collection. It is especially suitable for small children and geriatric patient. The U-MBCT brand products feature a specially designed cap for sealing the container. The bar coded labels enable the ease of sample handling in automated laboratories. The inner surface has an excellent Hemorepellency where it is necessary for a good preparation of high quality blood sample.
Ref. Cap Color Description
URS1005EK Pink EDTA, Spray dried, 0.5m1, Plastic
Ref. Cap Color Description
URS1005A Red Clot Activator, Spray dried, 0.5m1, Plastic
Ref. Cap Color Description
URS1005LH Green Lithium Heparin, Spray dried, 0.5m1, Plastic




Go Back       Back to Top